PARK International is manufacturer and exporter of Brass PG Cable Glands with a wide range and varied sizes as per our client’s specifications and needs. We use superior quality of raw materials, modern machining and check process to deliver PG glands to our customer. The cable glands could work perfectly in the machines, automation equipment, new energy system.
Features:
- Anti-Corrosion
- Ingress IP68 Waterproof
- Anti-Dust
- Vibration Control
- High – pressure sustainability
Sizes:
- PG -7 to PG – 48
- M12 to M63
All Sizes With Description as below:
PG 7 CABLE GLAND :
Pg7 cable gland, size pg 7 designed in pg thread with 12.5mm hole dimensions size, it’s made from brass with integrated strain relief and ip68 waterproof protection degree. The pg7 thread is the smallest types of our cable glands, it could allow the 2- 6.5 mm electrical cables throughout.
Pg7 cable gland could be used in all types of instruments, automation, power control, and industrial machines, it acts as sealing and termination devices to ensure the cables in the enclosure totally insulated from outside.The small size compact design ensures the installation procedure easy in small cramped spaces.
Pg7 cable gland has the advantage of high tensile strength, high reliability, ip68 waterproof degree, corrosion-resistant, vibration proof, the highest level of protection against dirt, dust, oil, grease, liquids, moisture, and gases.
| Size | PG-7 |
| Cable Range | 3mm, 6.5mm |
| A/F | 14.00mm |
| A | 7.60mm |
| B | 11.40mm |
| C | 13.80mm |
| D | 17.65mm |
| E | 7.00mm |
| F | PG-7 |
| Material | Brass BS 2874 CZ121 Pb3 |
| Operating Temp. | -25° C To +125° C |
| Thread | PG |
| Finish | Nickel Plated |
| Accessories | Lock Nut & ‘O’ Ring |
PG 9 CABLE GLAND
PG9 cable gland, Size PG9 designed with PG thread, it’s also known as strain relief cord grip with the hole size in 15.2mm, which is a small size cable gland in our glands range.
PG9 Cable Gland strain relief are available for the cable size ranging from 4-8mm, it has outstanding holding power on the cables, tight grip on the cord to avoid water coming in with IP68 protection degree.
PG9 cable glands are widely applied in the areas where the cables and wires safely throughout into housings. The cable glands could work perfectly in the machines, automation equipment, new energy system.
As one of the professional PG9 cable gland manufacturers, we ensure you . quality and maintenance of the waterproof IP68 degree function for superior protection against corrosion.
| Size | PG 9 |
| Cable Range | 3mm, 8mm |
| A/F | 18.00mm |
| A | 8.50mm |
| B | 12.20mm |
| C | 17.70mm |
| D | 18.50mm |
| E | 7mm |
| F | PG-9 |
| Material | Brass BS 2874 CZ121 Pb3 |
| Operating Temp. | -25° C To +125° C |
| Thread | PG |
| Finish | Nickel Plated |
| Accessories | Lock Nut & ‘O’ Ring |
PG 11 CABLE GLAND
PG11 is one of the small types of cable gland fitting size because of the hole size only 18.6mm, this dimensions only allow the cable size in the range of 5-10mm.
PG thread cable gland fitting is widely used for the electrical cables throughout, and this small cable gland connector could fix the cables with IP68 waterproof protection degree, it acts as cord grip strain relief in some applications.
The smallest cable gland hole size in our product range is PG7, but PG11 is also in the small scope. The small compact design has great advantages for their installation in narrow space
PG11 cable gland fitting is suitable for installation in many harsh environments with machines, instruments, photovoltaic system, it could fix the cables solidly enough to prevent it from corrosion.
| Size | PG 11 |
| Cable Range | 4mm, 10mm |
| A/F | 20.00mm |
| A | 10.30mm |
| B | 14.50mm |
| C | 19.60mm |
| D | 20.00mm |
| E | 6.00mm |
| F | PG-11 |
| Material | Brass BS 2874 CZ121 Pb3 |
| Operating Temp. | -25° C To +125° C |
| Thread | PG |
| Finish | Nickel Plated |
| Accessories | Lock Nut & ‘O’ Ring |
PG 13.5 CABLE GLAND
PG13.5 cable gland means the dimensions of the hole size is 13.5mm with PG thread, the clamping range for the conduit fittings size is PG13.5
There are two types of PG13.5 clamping ranges for the flexible cables and conduit fitting, it’s 6-12mm and 5-9mm, which means the hole size of the cable gland is same on 20.4mm, but the cable size could be available in 6-12mm or 5-9mm sizes.
PG cable gland has many types of applications such as explosion-proof cable glands, armored cable glands, double compression cable glands, and EMC cable glands.
| Size | PG 13.5 |
| Cable Range | 6mm, 12mm |
| A/F | 22.00mm |
| A | 13.50mm |
| B | 14.50mm |
| C | 21.50mm |
| D | 23.50mm |
| E | 8.00mm |
| F | PG-13.5 |
| Material | Brass BS 2874 CZ121 Pb3 |
| Operating Temp. | -25° C To +125° C |
| Thread | PG |
| Finish | Nickel Plated |
| Accessories | Lock Nut & ‘O’ Ring |
PG 16 CABLE GLAND
PG16 cable gland connectors designed with the PG thread and the hole dimensions size in 22.5mm, these dimensions only allow the cable size in the range of 10-14mm. it meets IP68 waterproof protection degree and resistant to avoid liquid acid.
The advanced compact size design of PG16 cable gland connectors is the best solution for the installation in a narrow space.
PG16 cable gland connector provides excellent strain relief and connects suitable cable types as described, so it acted as a mechanical cable entry device installation in a wide range of industries.
PG16 cable gland connector usually designed by many types of material made of metal, such called as stainless steel cable gland and brass cable gland which could provide wonderful sealing function and ensure the characteristic of the cable enters can be maintained adequately.
| Size | PG 16 |
| Cable Range | 8mm, 14mm |
| A/F | 24mm |
| A | 14.30mm |
| B | 15.5mm |
| C | 23.50mm |
| D | 23.50mm |
| E | 8mm |
| F | PG 16 |
| Material | Brass BS 2874 CZ121 Pb3 |
| Operating Temp. | -25° C To +125° C |
| Thread | PG |
| Finish | Nickel Plated |
| Accessories | Lock Nut & ‘O’ Ring |
PG 21 CABLE GLAND
PG21 electrical cable gland designed in 28.3mm hole size of PG thread for electrical cable clamping with IP68 waterproof degree. When carrying out PG21 electrical cable glands installation, the entry cables dimension must in the clamping range of 13-18mm size.
PG21 electrical cable gland sometimes installed with PG21 conduit which is the same size in mm, it could provide ideal strain relief and keep the conduit entry into the equipment inner space the same characteristic.
PG21 electrical cable gland has the advantages as follows: Hight temperature resistance, chemical resistance, superior strain relief, high oil resistance and variable clamping ranges etc.
| Size | PG 21 |
| Cable Range | 11mm, 18mm |
| A/F | 30.20mm |
| A | 18.50mm |
| B | 17.50mm |
| C | 29.50mm |
| D | 24.00mm |
| E | 8.00mm |
| F | PG-21 |
| Material | Brass BS 2874 CZ121 Pb3 |
| Operating Temp. | -25° C To +125° C |
| Thread | PG |
| Finish | Nickel Plated |
| Accessories | Lock Nut & ‘O’ Ring |
PG 29 CABLE GLAND
PG29 single compression cable gland designed in PG thread with the hole dimensions 37mm size, this dimensions only allow the cable size in the range of 18-25mm
when you tighten the cable gland, the compression only effected on one side of cable armoured place only. That’s the main difference between double compression cable gland, which causes the compression in both the armor and the inner sheath.
PG29 single compression cable gland offers a sealed point of contact for cables and wiring to enter an equipment housing without carrying any damaging elements into equipment inner.Find here online price details of companies selling Brass Cable Gland. Get info of suppliers, manufacturers, exporters, traders of Brass Cable Gland for buying in India.
| Size | PG 29 |
| Cable Range | 18mm, 25mm |
| A/F | 40.00mm |
| A | 25.50mm |
| B | 19.00mm |
| C | 39.50mm |
| D | 28.00mm |
| E | 9.00mm |
| F | PG-29 |
| Material | Brass BS 2874 CZ121 Pb3 |
| Operating Temp. | -25° C To +125° C |
| Thread | PG |
| Finish | Nickel Plated |
| Accessories | Lock Nut & ‘O’ Ring |
PG 36 CABLE GLAND
PG36 industrial cable gland means the cable glands designed in PG thread with the hole in 47mm dimensions size.this dimensions only allow the cable size in the range of 22-32mm.
The cable gland provides wonderful strain relief with IP68 protection grade against water and dust in industrial applications such as automation, new energy, photovoltaic technology etc..
PG36 industrial cable gland has high oil resistance and high-temperature resistance functions which ensure the cable gland working perfectly in the hazardous area for a long time.
The raw material could be many types of metal such as stainless steel and brass, especially ss304 and ss316 stainless steel cable gland, it has outstanding chemical resistant characteristic against acidic and alkaline elements.
| Size | PG 36 |
| Cable Range | 20mm, 32mm |
| A/F | 50.00mm |
| A | 32.50mm |
| B | 22.00mm |
| C | 49.20mm |
| D | 29.00mm |
| E | 9.00mm |
| F | PG-36 |
| Material | Brass BS 2874 CZ121 Pb3 |
| Operating Temp. | -25° C To +125° C |
| Thread | PG |
| Finish | Nickel Plated |
| Accessories | Lock Nut & ‘O’ Ring |
PG 42 CABLE GLAND
PG42 cable gland designed in PG thread type with outstanding fire-resistant function in the high-temperature environment, you should not worry about the sealing degree and protection capability using it in harsh place more than 150℃. this dimensions only allow the cable size in the range of 32-38mm
PG42 fire resistant cable gland is widely applied in explosion-proof condition to ensure the cable gland could protect the equipment and cables working in normal condition when the explosion occurs with the big fire.
Because of the outstanding fireproof performance, the PG42 fire resistant cable gland is suitable for potentially explosive atmospheres which require flameproof function.
| Size | PG 42 |
| Cable Range | 28mm, 38mm |
| A/F | 58.00mm |
| A | 38.50mm |
| B | 25.00mm |
| C | 56.50mm |
| D | 34.00mm |
| E | 12.00mm |
| F | PG-42 |
| Material | Brass BS 2874 CZ121 Pb3 |
| Operating Temp. | -25° C To +125° C |
| Thread | PG |
| Finish | Nickel Plated |
| Accessories | Lock Nut & ‘O’ Ring |
PG 48 CABLE GLAND
PG48 cable gland is normally acting as a connector for fixing the electrical cables underwater to ensure avoiding the leakage of the water into equipment inner. this dimensions only allow the cable size in the range of 37-44mm
PG48 cable gland has the outstanding sealing function with IP68 protection degree in 5 bar pressure, so it could provide a perfect sealing function to ensure the cables connection.
PG48 cable gland is usually used in the telecommunication cables underwater for digital signal transmission, sometimes under the sea. Because the raw material is made of stainless steel 316L, it has ideal corrosion-resistant function, you should not worry about any weak acid or weak base water damage the cable gland forever.
| Size | PG 48 |
| Cable Range | 34mm, 44mm |
| A/F | 64.00mm |
| A | 44.50mm |
| B | 25.00mm |
| C | 63.50mm |
| D | 34.00mm |
| E | 12.00mm |
| F | PG-48 |
| Material | Brass BS 2874 CZ121 Pb3 |
| Operating Temp. | -25° C To +125° C |
| Thread | PG |
| Finish | Nickel Plated |
| Accessories | Lock Nut & ‘O’ Ring |
Packaging: Cable glands are typically packaged in quantities suitable for different project sizes. They are commonly supplied in plastic or cardboard boxes, with clear labeling for easy identification of sizes and types.
Park International offers a comprehensive range of Brass PG Cable Glands designed for durability, reliability, and ease of installation. Our cable glands are manufactured to meet the highest quality standards, ensuring optimal performance and protection for your electrical and electronic installations.
For specific details, sizes, and packaging options, please refer to our product catalog or contact our sales team. We are committed to providing top-notch cable gland solutions tailored to your requirements.
SINGLE COMPRESSION CABLE GLAND <- Click here for more…
DOUBLE COMPRESSION CABLE GLAND <- Click here for more…
